Engine Oil Temperature Sensor Replacement (FWD)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Lifting and Jacking the Vehicle
1	Engine Oil Temperature Sensor CAUTION: Refer to Component Fastener Tightening Caution . NOTE: If the sensor is removed for any reason and will be reinstalled, the threads must have sealant applied before reinstallation. Procedure Disconnect the engine oil pressure sensor electrical wiring harness connector. Clean the sensor threads and apply sealant to the threads. Adhesives, Fluids, Lubricants, and Sealers Tighten 20 N.m (15 lb ft)

Callout

Component Name

Engine Oil Temperature Sensor

CAUTION:

NOTE:

If the sensor is removed for any reason and will be reinstalled, the threads must have sealant applied before reinstallation.

Procedure

Disconnect the engine oil pressure sensor electrical wiring harness connector.
Clean the sensor threads and apply sealant to the threads. Adhesives, Fluids, Lubricants, and Sealers

Tighten
20 N.m (15 lb ft)