Removal Procedure
WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
- Battery Negative Cable Terminal Cover (1) - Remove
- Electrical Connector (1) @Battery Monitor Module - DisconnectWARNING:
Before servicing any electrical component, the ignition key must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components.
- Battery Negative Cable Nut (2) - Remove
- Battery Negative Cable (3) - Remove
- Battery Post Negative Cable Clamp Nut (1) - Loosen
- Battery Monitor Module (2) - Remove