When to Perform the Procedure
NOTE:
Failure to perform this procedure may result in poor system performance, DTCs being set, or customer dissatisfaction.
This procedure is required when the following component has been repaired, replaced, removed, or serviced:
- B65 Manifold Absolute Pressure and Intake Air Temperature Sensor
- B75 Mass Airflow Sensor
- B192 Throttle Inlet Absolute Pressure Sensor
- Q38 Throttle Body
- M103 Turbocharger Vane Position Actuator
- Intake Air Duct - Collapsed/Leaking/Loose/Restricted
- Turbocharger