Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2021 >> Envision Preferred, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Assistance Systems >> Repair Instructions >> Advanced Parking Assist Front Object Sensor Replacement >> Removal Procedure

Removal Procedure

  1. GM5675720Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner Bolt (1) - Remove [5x]

  2. GM5696732Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner Bolt (1) - Remove [5x].

  3. Front Wheelhouse Liner (2) - Reposition
  4. GM5696737Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.

  5. Lift the locking tabs on the housing and remove the object sensor (1).
  6. Disconnect the electrical connector.
scientia non olet · About Mike's Workshop Manuals