Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.

Insert the sensor (1) into the housing.
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner (2) - Install

CAUTION:

Refer to Fastener Caution .

Front Wheelhouse Liner Bolt (1) - Install and tighten [5x] 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner Bolt (1) - Install and tighten [5x] 2.5 N.m (22 lb in)