Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2020 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B3618 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On/Vehicle - In Service Mode
  2. Operate the component: S13D Door Lock Switch - Driver - Lock
  3. Operate the component: S46 Liftgate Handle Switch - Pressed

    Verify a click can be heard or felt at the component when the scan tool control function was commanded: A23C Liftgate Latch Assembly

    • If a click cannot be heard or felt 

      Refer to: Circuit/System Testing

    • Go to next step: If a click can be heard or felt 
  4. All OK.
scientia non olet · About Mike's Workshop Manuals