Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Vehicle Access System) >> Diagnostic Information and Procedures >> DTC B3265 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On/Vehicle - In Service Mode
  2. Perform the scan tool control function: Rear Body Closure Unlatch - Unlatch

    Verify the component produces a clicking sound: A23C Liftgate Latch Assembly

    • If the component does not produce a sound 

      Refer to: Circuit/System Testing

    • Go to next step: If the component produces a sound 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals