Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Lighting System - Repair Instructions) >> Repair Instructions >> Brake Pedal Position Sensor Calibration >> Calibration Procedure

Calibration Procedure

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake.
  2. Ignition ON, engine OFF, place the transmission in the PARK position for automatic transmission or NEUTRAL position for manual transmission.
  3. Install a scan tool.
  4. Clear all DTCs before proceeding.
  5. Navigate to the Configuration/Reset Functions menu of the BCM.
  6. Select the Brake Pedal Position Sensor Learn procedure and follow the directions displayed on the screen.
  7. Navigate to the Configuration/Reset Functions menu of the ECM/HPCM.
  8. Select the Learn Functions menu.
  9. Select the Brake Pedal Position Sensor Learn procedure and follow the directions displayed on the screen.
scientia non olet · About Mike's Workshop Manuals