Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, 2019 Buick Regal, and 2018 Buick Regal TourX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (3.6L LGX) , or Battery Negative Cable Disconnection and Connection (2.0L LTG) 
  2. Battery - Remove - Battery Replacement (3.6L LGX) , or Battery Replacement (2.0L LTG) 
  3. Engine Control Module - Remove - Engine Control Module Replacement
  4. GM4619818Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Unclip [5x]

  5. Retaining Tab (3) - Release [2x]
  6. Retainer (1) - Reposition away
  7. GM4619819Courtesy of GENERAL MOTORS COMPANY

    Battery Tray Nut (1) - Remove [2x]

  8. Battery Tray Bolt (3) - Remove [3x]
  9. Battery Tray (2) - Remove