Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, 2019 Buick Regal, and 2018 Buick Regal TourX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (3.6L LGX) , or Battery Negative Cable Disconnection and Connection (2.0L LTG) 
  2. GM4589375Courtesy of GENERAL MOTORS COMPANY

    Engine Control Module Bracket (1) - Remove - Engine Control Module Replacement

  3. GM4605471Courtesy of GENERAL MOTORS COMPANY

    Retainer (2) - Unclip [2x]

  4. Battery Distribution Fuse Block Cover (1) - Remove
  5. GM4605474Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Post Clamp Nut (1) - Loosen

  6. Retainer (2) - Unclip
  7. GM4605475Courtesy of GENERAL MOTORS COMPANY

    Battery Distribution Engine Compartment Fuse Block (1) - Reposition away

  8. GM4605473Courtesy of GENERAL MOTORS COMPANY

    Battery Hold Down Bolt (1) - Remove [2x]

  9. Battery Hold Down Retainer Nut (2) - Remove
  10. Battery Hold Down Retainer (3) - Remove
  11. GM4605476Courtesy of GENERAL MOTORS COMPANY

    {If equipped} Electrical Connector (1) @ Retainer (2) - Unclip

  12. GM4605477Courtesy of GENERAL MOTORS COMPANY

    Battery Cover (1) - Remove