Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, 2019 Buick Regal, and 2018 Buick Regal TourX. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Battery Positive Cable (3) - Install
- Auxiliary Battery Positive Cable Fastener (2) @ Engine Wiring Harness Junction Block - Install and tighten - Engine Wiring Harness Junction Block Replacement (LTG) , or Engine Wiring Harness Junction Block Replacement (LGX)
- Engine Wiring Harness Junction Block Cover (1) - Install
Auxiliary Battery Positive Cable (2) - Install
- Auxiliary Battery Positive Cable Fastener (1) @ Battery Distribution Engine Compartment Fuse Block - Install and tighten - Battery Distribution Engine Compartment Fuse Block Replacement
- Battery Distribution Engine Compartment Fuse Block Cover (3) - Install
Engine Control Module Bracket (1) - Install - Engine Control Module Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (3.6L LGX) , or Battery Negative Cable Disconnection and Connection (2.0L LTG)
CAUTION:
Refer to Fastener Caution