Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B3265 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On/Vehicle - In Service Mode
  2. Perform the scan tool control function: Rear Body Closure Unlatch - Unlatch

    Verify the component produces a clicking sound: A23C Liftgate Latch Assembly

    • If the component does not produce a sound 

      Refer to: Circuit/System Testing

    • Go to next step: If the component produces a sound 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals