Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B153F >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the appropriate B71 Liftgate Object Sensor.
  2. Test for 8k-12k Ω between the signal terminal 1 and the low reference circuit terminal 2.
    • If not between 8k-12k 

      Replace the B71 Liftgate Object Sensor.

    • Go to next step: If between 8k-12k Ω 
  3. All OK
scientia non olet · About Mike's Workshop Manuals