Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2019 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Secondary And Configurable Customer Controls) >> Diagnostic Information and Procedures >> Steering Wheel Controls Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON. Verify the driver information center (DIC) illuminates.
    • If the DIC does not illuminate 

      Test or replace the instrument cluster.

    • Go to next step: If the DIC illuminates 
  2. Verify all the associated primary controls on the radio (Volume, Mute, Seek, etc.) operate properly.
    • Go to next step: If all of the primary controls function properly 
  3. Verify all functions on the S70R Steering Wheel Controls Switch - Right operate properly.
    • If some, but not all, functions on the S70R Steering Wheel Controls Switch - Right do not operate 

      Test or replace the S70R Steering Wheel Controls Switch - Right

    • If all functions on the S70R Steering Wheel Controls Switch - Right do not operate 

      Refer to All Controls Malfunction in Circuit/System Testing.

    • Go to next step: If all functions on the S70R Steering Wheel Controls Switch - Right operate properly 
  4. Verify the voice and mute functions of the S70L Steering Wheel Controls Switch - Left operate properly.
    • If either the voice or mute function does not operate from the S70L Steering Wheel Controls Switch - Left 

      Refer to Left Controls Malfunction in Circuit/System Testing.

    • Go to next step: If both the voice and mute functions of the S70L Steering Wheel Controls Switch - Left operate properly 
  5. All OK.