Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2019 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Parking Assistance Systems) >> Repair Instructions >> Advanced Parking Assist Alarm Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative

  1. GM3905140

    Insert the advance parking assist alarm sensor (1) into the housing.

  2. Connect the data link connector.
  3. Front Bumper Fascia Replacement
scientia non olet · About Mike's Workshop Manuals