Removal Procedure
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Brake Dust Warning .
WARNING:
Refer to Brake Fluid Irritant Warning .
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
Brake Hose Fitting Bolt (1) - Remove
- NOTE:
Do not reuse the brake hose fitting gaskets.
Brake Hose Fitting Gasket (1) [2x] @ Brake Hose Fitting (2) - Remove and DISCARD
- Cap the brake hose fitting to prevent brake fluid loss and contamination.
Brake Caliper Guide Pin Bolt (1) - Remove [2x]
Brake Caliper (1) - Remove