Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Generator Splash Shield (3) - Install

CAUTION:

Refer to Fastener Caution

Generator Nut (2) - Install and tighten 22 N.m (16 lb ft)
Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
Raise and support the vehicle. Lifting and Jacking the Vehicle
Courtesy of GENERAL MOTORS COMPANY

Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
Fig 1: Drive Belt Routing (LTG With Generator Shield)
Courtesy of GENERAL MOTORS COMPANY

Drive Belt (1) - Install - Drive Belt Replacement (LTG)
Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Assembly (2) - Install - Air Cleaner Assembly Replacement (LTG)
Connect the negative battery cable. Battery Negative Cable Disconnection and Connection