Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Generator Splash Shield (3) - Install

CAUTION:

Refer to Fastener Caution

Generator Nut (2) - Install and tighten 22 N.m (16 lb ft)
Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
Raise and support the vehicle. Lifting and Jacking the Vehicle
Courtesy of GENERAL MOTORS COMPANY

Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Assembly (1) - Install - Air Cleaner Assembly Replacement (LCV)
Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Outlet Duct (2) - Install - Air Cleaner Outlet Duct Replacement (LCV)
Connect the negative battery cable. Battery Negative Cable Disconnection and Connection