Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC P1B12 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that no other DTCs are set except for DTC P1B12 is set.
    • Go to next step: If no other DTCs are set 
  2. Replace the K17 Electronic Brake Control Module.
  3. Verify the DTC P1B12 does not set while operating the vehicle within the Conditions for Running the DTC.
    • If only DTC P1B12 is set 

      Replace the K20 Engine Control Module.

    • Go to next step: If the DTC does not set 
  4. All OK.
scientia non olet · About Mike's Workshop Manuals