Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2019 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake fluid level indicator switch electrical connector.
  2. GM2910018

    Using a small, flat-bladed tool, lift the locking tab on the underside of the brake fluid level indicator switch (1) and remove the switch.

  3. Inspect the master cylinder reservoir for damage and replace, if necessary. Refer to Brake Master Cylinder Reservoir Replacement .
scientia non olet · About Mike's Workshop Manuals