Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2018 >> LaCrosse Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement (Without KL9) >> Removal Procedure

Removal Procedure

  1. Reposition the left side rear compartment side trim panel. Rear Compartment Side Trim Replacement - Left Side (With LHN)Rear Compartment Side Trim Replacement - Left Side (With LGX)
  2. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection (Without KL9) 
  3. GM4738782

    Electrical Connector (2) @ Battery Current Sensor (1) - Disconnect

  4. GM4738784

    Battery Negative Cable Ground Nut (1) - Remove

  5. Battery Negative Cable (3) - Remove
    6. NOTE:

    Note the orientation of the battery current sensor prior to removal.

  6. Battery Current Sensor (2) - Remove
scientia non olet · About Mike's Workshop Manuals