Knock Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Callout	Component Name
Preliminary Procedures Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9) Starter Replacement (LUV)Starter Replacement (2H0)Starter Replacement (LE2-FWD)Starter Replacement (LE2-AWD)
1	Knock Sensor Fastener CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
2	Knock Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedures

Knock Sensor Fastener

CAUTION:

Tighten
25 N.m (18 lb ft)

Knock Sensor
Procedure
Disconnect the electrical connector.