Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2018 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions) >> Repair Instructions >> Intake Air Pressure and Temperature Sensor Replacement

Intake Air Pressure and Temperature Sensor Replacement

WARNING: This page is about a different variant/trim than selected.
GM3665598
Callout Component Name
1 Intake Air Pressure and Temperature Sensor Fastener
CAUTION:

Refer to Fastener Caution .


Tighten 
5 N.m (44 lb in)
2 Intake Air Pressure and Temperature Sensor

Procedure

  1. Disconnect the electrical connector.
  2. Perform the intake system learned values reset. Intake System Learned Values Reset 
scientia non olet · About Mike's Workshop Manuals