Removal Procedure
- Relieve the fuel pressure. Refer to Fuel Pressure Relief
- Drain the fuel tank. Refer to Fuel Tank Draining
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Remove Two-Piece Propeller Shaft. Refer to Two-Piece Propeller Shaft Replacement
- Remove Exhaust Muffler. Refer to Exhaust Muffler Replacement
- Disconnect the fuel pressure sensor electrical connector (1).
- Disconnect the evaporative emission and fuel pipes (2). Refer to Plastic Collar Quick Connect Fitting Service
- Disconnect the fuel pump electrical connector (1).
- Disconnect the evaporative emission pipes (1). Refer to Plastic Collar Quick Connect Fitting Service
- Remove the fuel tank filler hose clamp (1).
- Remove the fuel tank filler hose (2).
- Disconnect the fuel tank filler pipe (3). Refer to Plastic Collar Quick Connect Fitting Service
- Remove the fuel tank bolt (1).
- Place a suitable adjustable jack under the fuel tank.
- Remove the fuel tank strap fasteners (1).
- Remove the fuel tank straps (2).
- Remove the fuel tank (1) from the vehicle.
- If replacing fuel tank transfer parts as necessary.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .