Removal Procedure

Fig 1: Floor Front Air Outlet Duct - Left Side (Trax)

Courtesy of GENERAL MOTORS COMPANY

Remove Floor Air Outlet Duct (2). Refer to Floor Front Air Outlet Duct Replacement - Left Side (Chevrolet)

Fig 2: Instrument Panel Knee Bolster (Trax)

Courtesy of GENERAL MOTORS COMPANY

Remove Instrument Panel Knee Bolster (2). Refer to Instrument Panel Knee Bolster Replacement (Chevrolet)

Fig 3: Heater and Air Conditioning Control Bracket And Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove Heater and Air Conditioning Control with Cable Control (2). Refer to Heater and Air Conditioning Control with Cable Control Replacement (C60)

Fig 4: Mode Control Cable And Retaining Screw

Courtesy of GENERAL MOTORS COMPANY

Remove the mode control cable retaining screw (1) and the mode control cable (2) from the heater and air conditioning evaporator and blower module.

Fig 5: Identifying Temperature Control Cable Pulley, Cable Retainer And Wire

Courtesy of GENERAL MOTORS COMPANY

NOTE:

When replacing the mode control cable, perform step 5, 6, and 7 in order to remove the mode control cable without the removal of the instrument panel tie bar.

Remove the mode control cable pulley (3) from heater and air conditioning evaporator and blower module control side cable end, and release the cable retainer (1).
Remove the wire (2) from the mode control cable pulley groove (3).

Fig 6: Identifying Temperature Control Cable And Pulley

Courtesy of GENERAL MOTORS COMPANY

Move the mode control cable barrel (3) forward out of the pulley (2) detent, and slip the cable out of the detent to remove the mode control cable assembly (1) from the pulley (2).

Fig 7: Mode Control Cable

Courtesy of GENERAL MOTORS COMPANY

Maneuver the mode control cable (1) out from behind the tie bar and the instrument panel.