Engine Oil Pressure Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove Starter Motor. Refer to Starter Replacement (LE2-FWD)Starter Replacement (LE2-AWD) |
|
| 1 | Engine Oil Pressure Sensor
CAUTION:
Refer to Component Fastener Tightening Caution . Procedure Disconnect the electrical connector. Tighten 35 N.m (26 lb ft) |
| 2 | Engine Oil Pressure Sensor Seal |