Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2017 >> Encore Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions) >> Repair Instructions >> Brake Pedal Position Sensor Learn >> Calibration Procedure

Calibration Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Apply the parking brake.
  2. Ignition ON, engine OFF, place the transmission in the PARK position.
  3. Install a scan tool.
  4. Clear all DTCs before proceeding.
  5. Navigate to the Configuration/Reset Functions menu of the BCM.
  6. Select the Brake Pedal Position Sensor Learn procedure and follow the directions displayed on the screen.
  7. Navigate to the Configuration/Reset Functions menu of the ECM.
  8. Select the Learn Functions menu.
  9. Select the Brake Pedal Position Sensor Learn procedure and follow the directions displayed on the screen.
scientia non olet · About Mike's Workshop Manuals