Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2017 >> Cascada Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L (LWC) - DTC P0010 To DTC P0238 >> Diagnostic Information and Procedures >> DTC P0106 >> Typical Scan Tool Data

Typical Scan Tool Data

MAP Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine running at various operating conditions
Parameter Normal Range:  12 - 103 kPa (1.7 - 14.9 PSI)
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 104 kPa (15.1 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 104 kPa (15.1 PSI)*
Low Reference - 80 - 103 kPa (11.6 - 14.9 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.
MAP Sensor, if equipped with Turbocharger

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine running at various operating conditions
Parameter Normal Range:  12 - 225 kPa (1.7 - 32.6 PSI)
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)*
Low Reference - 255 kPa (36.9 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.