Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2017 >> Cascada Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions >> Repair Instructions >> Oil Pump Flow Control Valve Replacement >> Removal Procedure

Removal Procedure

  1. Remove the generator. Refer to Generator Replacement .
  2. Place a collecting basin underneath.
  3. GM3216214

    Disconnect the oil pump flow control valve wiring harness plug.

  4. Remove the 3 oil pump flow control valve bolts (3).
  5. Remove the oil pump flow control valve (2).
  6. Remove an DISCARD the oil pump flow control valve seal (1).
scientia non olet · About Mike's Workshop Manuals