Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2017 >> Cascada Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance Systems >> Diagnostic Information and Procedures >> DTC B356A >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Lane Departure Warning Switch Status parameter while pressing and releasing the Lane Departure Warning Switch. The parameter should change between On and Off.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter changes 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals