Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Power Door Lock System And Release Systems) >> Repair Instructions >> Rear Compartment Lid Hinge Spring Replacement

Rear Compartment Lid Hinge Spring Replacement

WARNING: This page is about a different car, the 2016 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Compartment Lid Hinge Spring
GM2020383Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

WARNING:

Refer to Eye Protection Warning .

Preliminary Procedure Remove the rear compartment side trim panel. Refer to Rear Compartment Side Trim Panel Replacement .
1 Rear Compartment Lid Spring
Procedure 
Pull the rear compartment lid spring backwards and unhook the rear compartment lid spring from the rear compartment lid hinge spring bracket.