Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2016 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement (LUV) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the drivetrain and front suspension frame transmission protector. Refer to Drivetrain and Front Suspension Frame Transmission Protector Replacement .
    5. Fig 1: Generator, Cables And Fasteners
    GM2777174Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the engine wiring harness connector (4).
  6. Remove the protective boot (1).
  7. Remove the battery positive cable fastener (2) and the battery positive cable (3).
    8. Fig 2: Generator And Mounting Fasteners
    GM2777172Courtesy of GENERAL MOTORS COMPANY
  8. Remove the 2 generator mounting fasteners (2).
  9. Remove the generator (1) from above.
scientia non olet · About Mike's Workshop Manuals