Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2016 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery negative cable. Refer to Battery Negative Cable Replacement .
    2. Fig 1: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
  2. Remove the current sensor (2) from the negative battery cable (1).
scientia non olet · About Mike's Workshop Manuals