Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2016 >> Encore Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LUV) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement (Engine to Tank) >> Removal Procedure

Removal Procedure

    WARNING:

    Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

  1. Relieve the fuel pressure. Refer to Fuel Pressure Relief .
  2. Remove the fuel pressure sensor - fuel feed pipe. Refer to Fuel Pressure Sensor Replacement - Fuel Feed Pipe .
    3. Fig 1: Fuel Feed Pipe
    GM2774661Courtesy of GENERAL MOTORS COMPANY
  3. Remove the fuel feed pipe (1) from the fuel rail. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Remove the fuel feed pipe (1) from the retainers (2).
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    6. Fig 2: Fuel Feed Pipe And Retainers
    GM2774507Courtesy of GENERAL MOTORS COMPANY
  6. Remove the fuel feed pipe (1) from the fuel feed pipe at the tank. Refer to Plastic Collar Quick Connect Fitting Service .
  7. Remove the underbody sill shield.
  8. Remove the fuel feed pipe (1) from the retainers (2).
  9. Remove the fuel feed pipe (1) from the vehicle.
scientia non olet · About Mike's Workshop Manuals