Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC P305F: Dual Battery Control Module Performance >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.

This system uses a dual battery configuration which includes the 12 V primary battery and 12 V auxiliary battery. The dual battery control module switches the 12 V primary battery and 12 V auxiliary battery in and out at appropriate times to support vehicle loads and battery charging. During engine crank, the auxiliary battery is switched in to supply voltage to the vehicle loads (except the starter motor which receives voltage from the primary battery) and the ECM monitors the auxiliary battery voltage through the IGN input.

scientia non olet · About Mike's Workshop Manuals