Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions >> Repair Instructions >> Charge Air Bypass Valve Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Charge Air Bypass Valve Hose Clamp
    GM2906658Courtesy of GENERAL MOTORS COMPANY
  1. Install the charge air bypass valve hose (3) to the charge air bypass valve - turbocharger.
  2. Install the charge air bypass valve hose clamp (2).
  3. Install the 2 retainer clips (1).
  4. Raise the vehicle.
    5. Fig 2: Charge Air Bypass Valve Hose
    GM2906659Courtesy of GENERAL MOTORS COMPANY
  5. Install the charge air bypass valve hose (1) to the charge air bypass valve - intake manifold.
  6. Install the charge air bypass valve hose clamp (2).
  7. Clip in the charge air bypass valve hose to the 2 clips (3).
  8. Install the engine shield, if equipped. Refer to Engine Shield Replacement .
  9. Lower and unsupported the vehicle. Refer to Lifting and Jacking the Vehicle .
  10. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
  11. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals