Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Ignition Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Turning Ignition Lock Cylinder To RUN Position
    GM874786Courtesy of GENERAL MOTORS COMPANY
  1. Turn the key to the RUN position and insert ignition lock cylinder into the lock housing.
  2. Turn the key to the LOCK position and remove the key from the ignition lock cylinder.
  3. Install the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals