Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0252: Vehicle Stability Control Module Sensors >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC C0187, C018B, C0196, C019B, C0287, C0297, or C0710 is not set.
    • If none of the DTCs are set 
  3. Perform the Vehicle Yaw Sensor Learn , and Steering Angle Sensor Centering  procedures.
  4. Ignition ON.
  5. Verify DTC C0252 does not set while operating vehicle within the conditions for running the DTC.
    • If the DTC is set 
  6. Replace the B119 Multi-axis Acceleration Sensor.
  7. Ignition ON.
  8. Verify DTC C0252 does not set while operating the vehicle within the Conditions for Running the DTC.
    • If the DTC is set 
    1. Replace the B99 Steering Wheel Angle Sensor.
    2. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
      • If the DTC sets, replace the K17 Electronic Brake Control Module.
      • If the DTC does not set
    3. All OK.
    • If the DTC is not set 
  9. All OK.
scientia non olet · About Mike's Workshop Manuals