Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2015 >> Regal Base, 2.4L Eng VIN K >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement - Fuel Feed Pipe

Fuel Pressure Sensor Replacement - Fuel Feed Pipe

Fig 1: Fuel Pressure Sensor - Fuel Feed Pipe
GM2581362Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (High Side) .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1 Fuel Pressure Sensor
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Disconnect the electrical connector.
  2. Use a NEW O-ring whenever the sensor is removed.

Tighten 
15 N.m (11 lb ft)
scientia non olet · About Mike's Workshop Manuals