Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2014 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
  2. Remove the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement 
    3. Fig 1: Front Compartment Fuse Block Housing Cover & Nuts
    GM2191905Courtesy of GENERAL MOTORS COMPANY
  3. Open the front compartment fuse block housing cover (1) and remove the 3 power steering wiring harness nut (2) .
    4. Fig 2: View Of Front Compartment Fuse Block, Wiring Harness Supply & Fuse Block Bolt
    GM2191906Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Bolts (1) are encapsulated on the end of threads so that they can not be removed from the fuse block.

  4. Remove the 3 front compartment fuse block bolt (1) and the front compartment fuse block wiring harness supply (2).
  5. Unlock retaining tabs and remove the front compartment fuse block (3).
scientia non olet · About Mike's Workshop Manuals