Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2014 >> Regal GS, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0131: Traction Control System Pressure >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC C0131 is not set.
    • If the DTC is set 
    1. Ignition ON.
    2. Perform the Brake Pressure Modulator Valve Pressure Sensor Calibration .
    3. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
      • If the DTC sets, replace the K17 Electronic Brake Control Module with Brake Pressure Modulator.
      • If the DTC does not set.
    4. All OK.
    • If the DTC is not set 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals