Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Fluid Reservoir Outlet Hose Replacement >> Installation Procedure

Installation Procedure

  1. Position the power steering fluid reservoir outlet hose on the vehicle.
    2. Fig 1: Power Steering Fluid Reservoir Outlet Hose
    GM2807373Courtesy of GENERAL MOTORS COMPANY
  2. Connect the power steering fluid reservoir outlet hose (2) to the power steering pump and secure with the power steering fluid reservoir outlet hose clamp (1).
    3. Fig 2: Steering Fluid Reservoir Outlet Hose And Clamp
    GM2807370Courtesy of GENERAL MOTORS COMPANY
  3. Connect the power steering fluid reservoir outlet hose (2) to the power steering fluid reservoir and secure with the power steering fluid reservoir outlet hose clamp (1).
  4. Clean any excess power steering fluid from the vehicle and remove the drain pans.
  5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
scientia non olet · About Mike's Workshop Manuals