Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Lighting System) >> Diagnostic Information and Procedures >> Front Fog Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, headlamps ON.
  2. Verify the scan tool Front Fog Lamps Switch parameter changes between Active and Inactive while commanding the front fog lamps ON and OFF with the front fog lamp switch.
    • If the parameter does not change 

      Refer to Front Fog Lamp Switch Malfunction.

    • If the parameter changes 
  3. Verify the front fog lamps turn ON and OFF when commanding the Front Fog Lamps ON and OFF with a scan tool.
    • If the front fog lamps do not turn ON and OFF 

      Refer to Front Fog Lamps Malfunction.

    • If the front fog lamps turn ON and OFF 
  4. Verify the front fog lamp indicator on the instrument cluster turns ON and OFF while commanding the front fog lamps ON and OFF with the front fog lamp switch.
    • If the front fog lamp indicator does not turn ON and OFF 

      Refer to Front Fog Lamp Indicator Malfunction.

    • If the front fog lamp indicator turns ON and OFF 
  5. All OK.
scientia non olet · About Mike's Workshop Manuals