Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Power Steering System) >> Repair Instructions >> Power Steering Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  2. Air Cleaner Assembly - Remove - AIR CLEANER ASSEMBLY REPLACEMENT (LE2) or AIR CLEANER ASSEMBLY REPLACEMENT
  3. Power Steering Pump Belt - Remove
    4. Fig 1: Power Steering Fluid Reservoir Outlet Hose
    GM2807341Courtesy of GENERAL MOTORS COMPANY
  4. Power Steering Fluid Reservoir Outlet Hose Clamp 1 - Disengage
  5. Power Steering Fluid Reservoir Outlet Hose 2 @Power Steering Pump - Remove
  6. Power Steering Gear Inlet Hose 3 @Power Steering Pump - Remove
  7. Power Steering Gear Inlet Hose Seal 4 - Remove

    DISCARD the seal.

  8. Air Conditioning Evaporator Hose Assembly - Remove - Air Conditioning Evaporator Hose Assembly Replacement (LUV)Air Conditioning Evaporator Hose Assembly Replacement (LE2)
    9. Fig 2: Power Steering Pump And Bolts
    GM2807986Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • The power steering pump pulley does NOT need to be removed on vehicle. The pulley is shown off for clarity.
    • Remove the power steering pump bolts through the holes in the pulley.
  9. Power Steering Pump Bolt 1 - Remove
  10. Remove the power steering pump (2) from the vehicle.
  11. Transfer components as necessary.
scientia non olet · About Mike's Workshop Manuals