Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions - Fuel Tank Pressure Sensor Replacement) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement

Fuel Tank Pressure Sensor Replacement

WARNING: This page is about a different car, the 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Tank Pressure Sensor
GM2884129Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

Preliminary Procedures Remove the fuel tank. Refer to Fuel Tank Replacement (AWD) .
1 Fuel Tank Pressure Sensor
Procedure 
Disconnect the electrical connector.