Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Wiper System And Washer System) >> Repair Instructions >> Windshield Washer Nozzle Replacement (Encore)

Windshield Washer Nozzle Replacement (Encore)

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Windshield Washer Nozzle (Encore)
GM2865801Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (Encore) .
1 Windshield Washer Nozzle (Qty 2)

Procedure

  1. Disconnect the windshield washer hose at the windshield washer nozzle being serviced.
  2. Compress the locking tab on the air inlet grille (arrows).
  3. Pull the windshield washer nozzle from the air inlet grille panel.