Direct Fuel Injector Replacement

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Direct Fuel Injectors

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the fuel injection fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement (LAF) .
1	Direct Fuel Injector Procedure: Disconnect the electrical connector.
2	Direct Fuel Injector Procedure: Remove the injector with EN-37281-A: injector remover and DT-2619-01: slide hammer. Special Tools EN-37281-A: Injector Remover DT-2619-01: Slide Hammer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure:
Remove the fuel injection fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement (LAF) .

Direct Fuel Injector
Procedure:
Disconnect the electrical connector.

Direct Fuel Injector
Procedure:
Remove the injector with EN-37281-A: injector remover and DT-2619-01: slide hammer.

Special Tools

EN-37281-A: Injector Remover
DT-2619-01: Slide Hammer

For equivalent regional tools, refer to Special Tools .