Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Roof Side Rail Module Replacement - Left Side >> Installation Procedure

Installation Procedure

    Fig 1: Positioning And Aligning Inflatable Restraint Roof Side Rail Module
    GM2194141Courtesy of GENERAL MOTORS COMPANY
  1. Position and align the inflatable restraint roof side rail module on in the vehicle (1).
    2. Fig 2: Inflatable Restraint Roof Side Rail Module And Fasteners
    GM2194142Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    After ignition ON, the airbag system readiness indicator illuminates for 4 seconds and then goes out.

  2. Attach the inflatable restraint roof side rail module with new metal clip (1) to the bracket (2).
  3. Insert the inflatable restraint roof side rail module fastener (3).
  4. Connect the wiring harness plug (4).
  5. Install the headlining trim panel. Refer to Headlining Trim Panel Replacement (With Sunroof) , Headlining Trim Panel Replacement (Without Sunroof) .
  6. Install the windshield side garnish molding. Refer to Windshield Side Garnish Molding Replacement .
scientia non olet · About Mike's Workshop Manuals