Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement (LEA)

Radiator Replacement (LEA)

WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator
GM2213435Courtesy of GENERAL MOTORS COMPANY
Radiator Replacement (LEA)

Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) , Cooling System Draining and Filling (GE 47716) .
  2. Remove the radiator inlet hose. Refer to Radiator Inlet Hose Replacement (LUK) , Radiator Inlet Hose Replacement (LHU) .
  3. Remove the radiator outlet hose. Refer to Radiator Outlet Hose Replacement (LUK) , Radiator Outlet Hose Replacement (LHU) .
  4. Remove transmission oil cooler lines. Refer to Fluid Cooler Inlet Hose Replacement , and Fluid Cooler Outlet Hose Replacement .
  5. Reposition and secure the A/C condenser to the impact bar without disconnecting the lines. Refer to Air Conditioning Condenser Replacement .
  6. Disconnect the engine coolant fan harness electrical connectors.
  7. Remove the radiator support brackets. Refer to Radiator Support Bracket Replacement .
1 Radiator
Procedure 
Remove the engine coolant fan shroud from the radiator. Refer to Engine Coolant Fan Shroud Replacement (LUK) , Engine Coolant Fan Shroud Replacement (LHU) .