Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Fixed And MOVEABLE Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening. Refer to Adhesive Installation of Rear Windows .
  2. Connect the rear window defogger electrical connectors.
  3. Install the rear window radio antenna connector.
  4. Connect the OnStar® antenna, if equipped.

    Check the radio and OnStar® system to verify reception.

  5. Close the rear compartment lid.
  6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.